Commercial
Cold storage, sealed against moisture.
Closed cell spray foam for cold storage buildings: a moisture and vapor barrier as well as insulation.
4.6 on Google · 58 reviewsHow we do it.
- Closed cell for moisture and vapor.It's an air, moisture and vapor barrier in one layer.
- It can go directly on metal.We strongly recommend a coating over it.
- Conditions checked before we spray.Spray foam is temperature sensitive, and surfaces have to be below 8% moisture.
- Bid like a commercial job.Send drawings and specs through our bid request.
Foam and thickness.
| Foam | Where it goes | Typical thickness | R-value at that thickness |
|---|---|---|---|
| Closed cell | Directly on metal. A coating over it is strongly recommended. | Quoted per job | Set by thickness |
R-value measures how well insulation holds back heat. The higher the R-value, the greater the insulating power. Ask your seller for the fact sheet on R-values. R-values are for UPC 500 open cell and UPC 2.0 HFO closed cell, from the manufacturer's code compliance reports, at the thickness shown. Closed cell is rigid and also blocks moisture; open cell is softer and dampens sound. We choose the foam for each job. See the data sheets
Questions.
Can you spray wet or cold surfaces?
No. Moisture has to be below 8%, and spray foam is temperature sensitive, so we check conditions first.
Does foam on metal need a coating?
Closed cell can go directly on metal, and we strongly recommend a coating over it. Several coatings can go over foam, and we can supply one if you need it.
How do quotes work?
We quote on site or over the phone, and quotes go out within 24 hours. A quote is good for 30 days.
Get a Free Quote
Tell us about the project.
Tell us what you're insulating. Prefer to talk? Call or text (765) 639-6136
- Quotes within 24 hours
- On site or over the phone
- Photos help us quote faster
- Lifetime, transferable foam warranty