Homes
Rim joists, sealed where the house sits on the foundation.
Closed cell spray foam, 2 inches or more, on rim joists in basements and crawlspaces.
4.6 on Google · 58 reviewsHow we do it.
- Closed cell, 2 inches or more.It seals air and blocks moisture in one layer.
- Dry wood only.Moisture has to be below 8% before we spray.
- Clear access.We spray from 18 to 24 inches away, so the area along the rim joist needs to be clear.
- No mess.Everything nearby is covered in plastic first.
Foam and thickness.
| Foam | Where it goes | Typical thickness | R-value at that thickness |
|---|---|---|---|
| Closed cell | Rim joists | 2 in + | R-15 |
R-value measures how well insulation holds back heat. The higher the R-value, the greater the insulating power. Ask your seller for the fact sheet on R-values. R-values are for UPC 500 open cell and UPC 2.0 HFO closed cell, from the manufacturer's code compliance reports, at the thickness shown. Closed cell is rigid and also blocks moisture; open cell is softer and dampens sound. We choose the foam for each job. See the data sheets
Questions.
Can you spray wet or cold surfaces?
No. Moisture has to be below 8%, and spray foam is temperature sensitive, so we check conditions first.
Will there be a mess?
No. We cover everything in plastic, and the area has to be cleared so we can prep it.
How long before we can go back inside?
Contractors can go back in after 12 hours. Homeowners after 24 hours.
Get a Free Quote
Tell us about the rim joists.
Tell us what you're insulating. Prefer to talk? Call or text (765) 639-6136
- Quotes within 24 hours
- On site or over the phone
- Photos help us quote faster
- Lifetime, transferable foam warranty